Skip to main content

Posts

How a Soma Fogcutter and a Fairdale Weekender changed our Weekend

Normally our Saturday rides were 40-60 miles long with some sort of workout thrown in.  Bang it out in three or four hours then get on with yardwork or groceries or whatever needed doing.  In June, I bought a Soma Fogcutter for my wife.  I had purchased a Fairdale Weekender for me earlier in the year and wanted one for her too.  It wasn't available in her size so we went with the Fogcutter instead.  The idea of buying these bikes was to ride places we normally wouldn't on road bikes - bad roads, busy bike trails, and urban rides where there's a lot of stop-and-go.  Plus, they have fenders so we could ride when it's wet and racks so we could carry stuff. The day after I built her Fogcutter, we decided to do a 'shakedown' ride to break in the bikes, make sure they fit correctly and make sure they worked well.  Instead of doing our normal Saturday road bike ride we decided to ride the adventure bikes into Indianapolis to find a coffee shop and have so...

Pumpkinvine Ride in Goshen, IN

On June 18th, my wife and I drove to Goshen to do the annual Pumkinvine ride.  They offer a 50 mile and a 100 mile (actually, 103 mile) ride through Amish country in northern Indiana.  Proceeds benefit the Pumkinvine trail, a paved rail trail that runs between Goshen and Shipshewana, Indiana.  We planned to do the century, my wife's first this year and my first one in nearly three years.  It would also be Kathy's longest ride (a new PR) and my second longest.  As a matter of fact, it's been 25 years since I've done a ride longer than this. We met up with Kelly, a long time friend and frequent riding partner of Kathy.  We left the Elkhart county fairgrounds at 8am with no preconceived notions of average speed and no hurry to finish.  The ride was well marked, but just in case I had downloaded the route to Kathy's Garmin so we had an easy to follow map. The country is beautiful in this part of Indiana.  For the most part, things move a lit...

Classic Colnago Steel

I received this frameset as a Christmas gift last year and it quickly turned into one of my favorite bikes.  I haven't spent much time trying to find out the exact model and year because, frankly, it really doesn't matter to me.  I have a serious appreciation of old steel, particularly Italian steel.   (Don't mistake me for a curmudgeon though.  I like carbon fiber too- I own a couple carbon bikes)  I was raised in my mechanical youth with steel and they still have a soft spot in my heart. When I was younger I worked in a small shop in a small town.  The only Colnago bikes I ever saw were in a magazine.  To me they were rare and expensive, something I wanted badly but never thought I'd be able to afford one.  At that time the used bike market wasn't anything like it is today (how eBay has changed things!) and these types of bikes have become much easier and less costly than they were in 1990. For the last few years, I've enjoyed b...

What's 4130 Chromoly?

This posting is a shortened version of a technical paper I wrote for work. I hope you enjoy, and learn in the process! At one time, all bikes were made of steel.  Steel has been popular thanks to its strength to weight ratio and ease of use.  These factors as well as it’s low cost and availability make it ideal for use in bicycles.  The most common type of steel used for bikes is chromoly , and 4130 chromoly is the most widely recognized.  So what does chromoly mean and what do the numbers 4130 refer to? Steel is an alloy of iron and other metals.  The term ‘alloy’ is commonly used to refer to aluminum but it actually refers to any metal that’s mixed with other elements in order to achieve the desired mechanical properties such as strength, weight, durability, hardness, weldablitly, etc.  ' Chromoly ' refers to a specific type of steel alloy that combines Iron with Chro mium and Moly bdenum (chro-moly, get it?) along with small amounts of oth...

Trek Travel 2012 California Coast Tour Finale

This is the last in a series of posts about the Trek Travel bike tour my wife and I took with the owner of the shop I work at and some friends.  Part one covered the first two days beginning at the Sea Ranch lodge and finished with us staying in Bodega Bay, and part two covered the next two days from Bodega Bay to Tiburon.  My post today will cover the last day of riding into San Francisco and back to Tiburon. Day 5 The last day of riding on our trip began with a short ferry ride from Tiburon past Alcatraz Island to San Francisco.  Once back on land we headed through San Francisco past fisherman's wharf, past the Presido, to the base of the Golden Gate bridge.  Before crossing the bridge, we regrouped to get some pictures with the bridge in the background.  The view was incredible and the bridge was like nothing I've ever seen.  Crossing the bridge was a treat - the view was spectacular but the foot and bike traffic was heavy enough on the path across...

Meeting Eddy Merckx

A few years ago I had the opportunity to attend Interbike, the annual bicycle industry trade show in Las Vegas, with a couple coworkers.  The show promised and delivered the chance to see all the cool new products that were being released for the next model year, talk to industry insiders, and learn about new product and tech. Along with all the product and clinics, there were stars of the sport there.  Meeting John Tomac again was a treat, as was big George Hincapie, Jay Miron, Ron Wilkerson.  But our biggest surprise came while we were headed out to grab a drink when we noticed a familiar face at a table facing the isle...we both stopped, looked at each other, and said 'That's Eddy Merckx!' Even though we were starving, we decided quickly that we couldn't let an opportunity like this pass by.  We jumped in line and waited our turn to see Eddy.  Waiting in line might seem like a horrible way to spend a half hour of your life at a trade show.  In thi...

Trek Travel 2012 California Coast Part 2

This is part two in a series of posts about the Trek Travel bike tour my wife and I took with the owner of the shop I work at and some friends.  Part one covered the first two days beginning at the Sea Ranch lodge and finished with us staying in Bodega Bay.  My post today will cover the next two days that lead us to Tiburon.   Day 3 That tiny person is my wife Day three  had us riding north for a while in order to do a loop inland for a bit.  This ride featured plenty of riding on the coast that was spectacular, but we also had the opportunity to see some of the forest near the coast.  We started by riding up the coast the opposite way that we had ridden the day before.  We rode along the coast for about 10 miles before turning inland where we were treated with more beautiful riding through the woods in the Russian River valley.  We actually stopped to walk into the woods to get pictures of the huge trees - like nothing I've ever seen...

BMX Action Trick Team in Peru, IN 1984

In 1984 I was 13 years old and was crazy about BMX.   At the time, I didn't even have a nice bike .  I rode my black AMF bmx bike with yellow mag wheels everywhere and loved it. It wasn't a Mongoose or Redline- the bikes everyone wanted back then - but I loved it all the same.   I read all the BMX magazines that I could get my hands on.  My favorite was BMX Action and by favorite rider was RL Osborn.  I would read the magazine cover to cover and learn the simple tricks that were in the how-to section of the magazine.  I had seen articles about the BMX Action trick team doing shows around the country.  I used to dream of how awesome it would be to go see them some time. That dream became reality in the summer of 1984. The owner of the Hive Bike Shop hired them to give two shows per day for a week in my hometown of Peru, Indiana.  I was blown away when I heard about it.  At first, I didn't believe it - it was just a rumor that spread...

Trek Travel 2012 California Coast Trip Part 1

In September 2012 my wife and I were invited by my employer to join him and his wife along with some friends of the shop on a Trek Travel bike tour of northern California.  The trip began at the Sea Ranch Lodge, about 110 miles north of San Francisco, and finished in Sausalito with a side trip through San Francisco and up Mt Tam.  The 5-Day tour took us down the Pacific Coast Highway with a few trips inland and spectacular views of the coast. Day One The first day was spent taking the van from downtown San Francisco to the Sea Ranch Lodge, getting to know our new friends and guides, and setting the Trek Madone bikes.  After getting settled in at the lodge and setting up the bikes, we all headed out for a short ride up the Pacific Coast Highway and back before dinner. The view from our window, Sea Ranch Lodge Day Two My Wife, at the edge of the U.S. The second day began with breakfast facing the ocean, with a spectacular view of a whale surfacing while...

Inner Tubes

For many years, I've heard older people say that inner tubes don't hold air as well as they used to.  It's usually the same thing - 'I never had to air up my tires when I was a kid.'   Others seem to think that tubes puncture easier now than they did even 15 or 20 years ago.  All of this got me wondering if there really is a difference between the quality of tubes and if it's changed through the years. First, a (very) short history:  Originally tires and tubes were made from natural rubber from the Hevea tree that is grown almost exclusively in Indonesia and Malaya.  During World War II, Japan had invaded these countries and cut off the world’s supply of natural rubber.  This led to a shortage and the need for an alternative.   At the time, German engineers had already been working on a synthetic rubber, but it wasn't until 1942 that U.S. engineers were able to develop it into a useable rubber compound called Butyl.   Butyl synthetic rubber...

A ride with an Old Friend

The other day I decided to take the long way to work and ride my Olmo - a bike I've had for 25 years and ridden over 25000 miles.   This is not the first road bike I purchased, but it is the first Italian bike I purchased.  I fell in love with it immediately, mostly because I felt so special riding Italian steel.  This was 1990, when carbon fiber was starting to appear on the market and aluminum frames were all the rage.  I was 19 and this bike made me feel special when I'd ride. One of the greatest things about it is that I purchased it on clearance from the importer for $135.  Brand new Italian steel for a screaming deal!  Granted, it's Oria steel that doesn't have the same pedigree as Reynolds or Columbus.  However, it has been a fantastic bike for me.   A few years ago I updated it with a Campy Daytona group.  Campy was something I'd only heard of when I was 19.  We didn't see it in our shop, the general consensus was that it was to...

Chain Wear and Lubrication

Chain lubricant can be one of the most controversial aspects of bicycle mechanics.  It seems like most mechanics you talk to will have their own opinion as to what's best and they will strongly defend their choice.  So what is the difference between the chain lube and why are there so many kinds? Before we begin, let's go over some facts about chain wear. How does a chain wear and what is Chain 'Strech'? As a bike is pedaled, the roller, pin, and bushing parts of a chain are forced together under a high load.  This causes friction between the metal parts, causing them to wear down.  The first picture below shows wear on the pin, the second picture shows wear on the bushing part of the inner link plate (hard to see, it's shown as the lower left part of the hole wearing away).    .    As these parts wear, the pins gradually become farther apart across inner link plates.   This what is referred to as 'chain stretch'  ...